APU Loudness Compressor

A Compressor for the Modern Age of Loudness

Tired of compressors that operate on outdated principles? The APU Loudness Compressor is built from the ground up for today’s loudness-normalized world. It’s a compressor/expander that thinks in terms of LUFS, just like you do. The result is transparent, effortless dynamic range control that’s perfectly suited for music, post-production, and broadcast.

Source & Target: A More Intuitive Approach

Instead of wrestling with threshold and ratio, the APU Loudness Compressor introduces a more intuitive “Source -> Target” workflow. You define the loudness range of your source material and the target range you want to hit. The compressor then does the heavy lifting, transparently mapping the dynamics of your audio to the desired range. It’s a more logical way to work, and it gets you to your desired result faster.

All the Tools You Need

Of course, the APU Loudness Compressor also includes all the features you’d expect from a modern dynamics processor:

Multiple Loudness Models: Choose between LUFS (momentary, short-term, integrated), RMS, Peak and True Peak detection to get the perfect response for any material.

Built-in True Peak Limiter: A true-peak limiter with lookahead is included to catch any overshoots.

Sidechain Support: Switch to downward compression dynamics type and easily dial in ducking and other classic sidechain effects.

Alternate Detector Weightings: Fine-tune the compressor’s response with a variety of weighting filters, including ECMA-418, ITU-R 468, A, C, and K-weighting.

Multi-channel and Atmos-ready: The compressor is ready for modern immersive audio formats.

Dial It In

The APU Loudness Compressor is designed to be a workhorse, not a toy. The interface is clean and straightforward, with a focus on giving you the information you need to make good decisions. And with a variety of themes, you can customize the look to fit your workflow.

If you’re looking for a compressor that’s as serious about loudness as you are, give the APU Loudness Compressor a try. Download the free demo and hear the difference for yourself.

If you’d like a more in-depth third-party review of the compressor, check out the videos below:

• White Sea Studio - You need this!
  
• Dan Worrall - APU Loudness Compressor

Add to Cart ($40.00 $30.00) Download (30-day Trial)

Note: Existing customers can request a discount code using the support beacon on the bottom-right.
System requirements: macOS 10.14 (x64, ARM), Windows 10 (x86, x64), OpenGL 3.2.
Supported software formats: Standalone application, VST, AU, AAX (Pro Tools 11+).

Measurement Modes

One of the key features of this compressor is its support for a variety of loudness types. The compressor’s detection circuitry can be configured to use either LUFS or traditional measurement units (RMS, Peak). You can also choose to split or link channels, which is particularly useful for multi-channel audio formats such as Dolby Atmos®.

The compressor’s detection circuitry can be configured to use any of the following loudness types:

Momentary

Momentary is a short duration LUFS measurement (400ms), which is useful for processing the audio’s moment-by-moment dynamics. This mode is responsive but also transparent, making it an appropriate default for the compressor. K-weighting and channel weighting are applied to the compressor’s detection circuitry, improving perceptual accuracy.

Short-Term

Short-Term is a longer duration LUFS measurement (3 seconds), which is useful for processing the audio’s large scale dynamics. Given the longer duration, this mode is less responsive than momentary, but it can be useful for adjusting the bigger picture of the audio’s dynamics. K-weighting and channel weighting are applied as with momentary.

Integrated

Integrated is an infinite duration LUFS measurement. K-weighting and channel weighting are applied as with momentary, as well as both relative and absolute gating. This loudness type can be useful for continuously wrangling the audio’s integrated loudness toward a specific target range.

RMS

RMS loudness types use a rolling time interval of 150ms by default, which can be adjusted. RMS is a traditional loudness measurement, which is a good first-order approximation of perceived loudness. This mode doesn’t apply K-weighting or channel weighting to the compressor’s detection circuitry, giving it a more traditional character.

True Peak

True Peak loudness types are similar to traditional peak measurements, but they are more accurate as they take into consideration inter-sample peaks. These measurements use a time interval equal to the configured block size (1ms by default). This mode is extremely responsive, making it suitable for very fast attack and release times.

Peak

Peak loudness types are a standard peak circuit, operating on a time interval equal to the configured block size (1ms by default). This is another traditional compressor style measurement. Technically, this mode is even slightly more responsive than True Peak, but it is less accurate as it doesn’t take into consideration inter-sample peaks.

Alternate Weighting

In addition to the standard K-weighting for LUFS measurements, the dynamics engine now supports several alternate weighting curves. These curves modify the detector’s frequency response, allowing the dynamics processing to be tailored for specific perceptual goals or technical standards. This can be useful for achieving more transparent results, targeting specific frequency ranges, or emulating the behavior of classic hardware.

The screenshots below are courtesy of the Loudness Contour plugin, which allows visualization of the frequency response of each contour type. For the compressor, the supported weighting types are implemented as zero-latency IIR filters, which allows them to be used in real-time without introducing latency.

ECMA-418

ECMA-418 is a modern standard for perceptual frequency weighting, designed to reflect human hearing sensitivity in typical listening environments. Unlike legacy curves such as A- or C-weighting, ECMA-418 is based on contemporary psychoacoustic research. Using it in the detector can lead to dynamics processing that aligns very closely with perceived loudness, resulting in transparent and natural-sounding compression.

ITU-R 468

ITU-R 468 is a weighting standard designed for measuring noise in broadcast systems. It strongly emphasizes the 1-9 kHz range, making the detector highly sensitive to frequencies associated with harshness or sibilance. This can be creatively used as a frequency-selective compressor to tame harshness in cymbals, vocals, or distorted guitars without needing a separate EQ in the sidechain.

A-weighting

A-weighting approximates human hearing at moderate levels (~40 phon). It has a significant low-frequency roll-off and a broad peak in the mid-range (1-5 kHz). When used in the detector, it causes the compressor to be less reactive to low-frequency content and more sensitive to the mid-range, which can be useful for managing vocal presence or preventing bass frequencies from dominating the compression.

C-weighting

C-weighting has a much flatter response than A-weighting, with less aggressive low-frequency roll-off, and is intended for higher sound pressure levels (~100 phon). Using C-weighting results in dynamics processing that is more responsive to low-frequency energy, making it suitable for full-range material where you want the bass to contribute more significantly to the overall dynamics control.

Limiter

The compressor includes a built-in limiter which works seamlessly with the compressor’s attack/release ballistics. The limiter’s look-ahead setting is used to throttle the attack/release ballistics to prevent overshoots and can be configured to operate in Peak or True Peak mode.

Dynamic Types

In additional to the unique “Source › Target” mode, the compressor also supports a variety of dynamic types. The compressor can be configured to operate as a traditional downward compressor, upward compressor, downward expander, upward expander, or soft limiting. These modes can be selected using the drop-down menu above the “Dry/Wet” dial.

Credits

This software was developed by APU Software, LLC and is available as VST (windows x64/x86, macOS universal), Audio Unit (macOS universal), Pro Tools (windows x64/x86, macOS universal), or Standalone Application. The software libraries below are utilized for portions of the software:

• JUCE (cross-platform audio and user interface framework)
• Boost (header-only algorithms)
• libebur128 (loudness measurements)
• melatonin_blur (blur effects)

Demo video song credits:

• Annasara - A Lifetime Rolls By, licensed via Audiio.